- Öhlins “Road and Track” Kit
- 3DM Motorsport Öhlins “Road and Track Kit RTR” (Ready to Run)
- 3DM Motorsport “Road Sport” Kit
- 3DM Motorsport “TrackDay” Kit
- 3DM Motorsport/Öhlins Dedicated Track Kit
- 3DM Motorsport Öhlins TTX Motorsport Kit
F3X Öhlins Road and Track Basic Kit
These are the basic kits out of the box and un-assembled. This is what you will find on most other eCommerce sites which are drop shipped straight from Öhlins.
These kits are designed to use the OEM mounts. Depending on your application, you may need special tools such as a spring compressor to dismantle your old suspension if you intend to reuse the original OEM mounts. Alternately, can purchase new mounts and the associated specialty hardware before assembly. You will need to be fairly mechanical savvy to install this kit, otherwise we recommend a professional shop perform the install and setup.
Assuming you use OEM mounts, these kits will have factory like NVH. The spring rates are increased over OEM so there will be some slight increase in harshness.
All Kits Include: Front dampers with perches, rear dampers, springs, rear spring ride height adjuster, adjuster tools, stickers, and instruction manual. Please note the F3X cars came with multiple suspension options from the factory such as the basic suspension and suspensions with Electronic Damper Control (EDC), each requiring specific anti roll bar linkages. 3DM includes new left and right anti roll bar linkages to remove any confusion and hangups during installation.
- Öhlins Part Number: BMS MP00
- Front Spring Rate: (60 N/mm) (342 lbs/in)
- Rear Spring Rate: (160 N/mm)(915 lbs/in)
Left and Right OEM anti roll bar linkages (these are included by 3DM and are not part of the base BMS MP00 kit)
ÖHLINS ROAD AND TRACK RTR KIT
(READY TO RUN)
3DM pre-assembles the basic Öhlins Road and Track Kits with OEM mounts so they are ready to bolt up to your car out of the box. This removes the need to research and source all the pieces yourself. It also reduces the risk of getting caught mid install with an incorrect part. New mounting hardware is also included depending on the application. All ride height settings are set to Öhlins recommended starting points with spring perch jam nuts torqued. You can always request a different setting or change it yourself before install.
In most cases, basic hand tools are all that are needed to install these kits. There should be no need for complicated special tools such as a spring compressor. Every DIY mechanic operates at a different pace but with these kits you will likely cut install time in less than half over a basic kit.
If you are having your favorite shop perform the install, the RTR kits will save you labor costs as well, offsetting the extra cost of the new mounts and hardware. We recommend letting your shop know this setup comes pre-assembled so they can adjust their labor estimate accordingly.
RTR Kits Include:
- Ohlins Road and Track kit: BMS MP00
- OEM front top mounts and hardware and gaskets
- OEM upper shock mounts, hardware and gaskets
- Front anti roll bar linkages and hardware
- Front spindle clamp hardware
- Front spindle clamp spreader tool
- Rear lower shock mounting hardware
3DM TRACKDAY SERIES KIT
(TRACK FOCUSED, STREET FRIENDLY)
Our ‘TrackDay Series’ kits take the Öhlins Road and Track dampers to the next level while still retaining street-ability. While you certainly can “set it and forget it” with these kits, they are geared more towards the person who wants to tinker with their suspension on a regular basis.
These kits are not “shopping cart” developed. Tweaks to each component have been made to ensure proper fitment and the ultimate performance.
Contact Us to be put on a notification list when these kits are available
ÖHLINS DEDICATED TRACK KIT
(COMPETITIVE, NOT COMPLICATED)
These kits have been designed for cars that see nothing but track use. They are similar in fitment to our TrackDay Series kits but with much higher spring rates and valving to match including a modified Dual Flow Valve setup. All mounts are spherical bearings.
All Kits Include:
- Re-valved dampers
- Race Springs
- Camber plates
- Spherical bearing rear lower shock mounts
- Spherical bearing rear upper shock mounts
- Ohlins Rear Ride Height Adjuster and Spring Perches
ÖHLINS MOTORSPORT KIT
(THE ULTIMATE RACING SUSPENSION)
3DM Motorsport F3X Öhlins TTX Motorsport Suspension Kit (Under development)
These are for the serious racer looking for the extra edge. TTX is a twin tube damper that is fully pressure balanced eliminating the risk of cavitation, enabling the use of low gas pressure which keeps friction at bay. The low amount of hysteresis results in excellent short stroke/high force performance.
Front: TTX 46 Strut Damper: The TTX 46 strut damper is available in 2 way, 3 way, and 4 way adjustable. Through rod technology removes gas pressure from the piston shaft reducing friction tremendously.
Rear TTX 36 ILX Damper: Available in 2 way, 3 way, and 4 way adjustable. The inline reservoir creates a compact package as there is no need for an external reservoir.
Contact Us to be put on a notification list when these kits are available or to discuss your individual racecar needs.