AIM MXS Dash Logger

  • $ 2,299.00


3DM Motorsport AIM Documentation

New to AIM or already purchased an AIM product? Check out our AIM Documentation page where you will find information that may help guide you on which product suits your needs and/or aid in the installation and use of your AIM product. 

The AIM MXS Dash Logger

The compact color TFT dash logger for Motorsports.

A Wide Range of Data Sources

MXs is the new AiM dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. 
Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display makes it perfect for wide cockpits installation.

Can Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

High Contrast TFT Display

A high contrast TFT display identifies MXG at the first glance. 
An ambient light sensor keeps the backlight at optimum brightness levels.

Freely Configurable Pages

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two push buttons.

 

Flexible Alarms

MXS features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.

Two Digital Outputs

MXS features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

Integrated Shift Light Array

Choose from a host of advanced multicoloured RGB shift light patterns that can be customized to your liking, and for each unique gear when required.

Race Studio 3

Race Studio 3 is free to download and included in this kit. It is the heart of your MXL2, managing all your activities related to: 

Configuration
With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

 

Analysis
With Race Studio 3 you can also analyse all data recorded by MXL2 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

  • MXS Data Logger
  • 37 Pin Standard Harness
  • GPS Module with Cable
  • USB Cable
  • Software Installation CD

Data Hub
AiM data loggers have a single AiM CAN input/output. (Not to be confused with the ECU CAN network) The Data Hub allows you to expand the AiM CAN network to allow the use of multiple AiM peripherals such as LCU Lambda Controller, GPS08 Module, TC hubs, SmartyCam, and Channel Expansion.  

 

Channel Expansion:
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed. 

TC Hub:
It adds 4 K thermocouples.

LCU-One Lambda Controller:
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

SmartyCam HD Camera Rev 2.1:
The on-board cameras that overlays on videos the data sampled by your logger.

Memory Module:
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.


22 Pin Harness: V02573020
This expansion harnesses lets you access the advanced functions of your AiM MXL2 data logger. Extra analog sensor channels, digital wheel speed senor inputs, digital outputs, and RS232 ECU connections, etc.

22 Pin Harness w/ 1 thermocouple: V02573080
This expansion harnesses lets you access the advanced functions of your AiM MXL2 data logger. Extra analog sensor channels, digital wheel speed senor inputs, digital outputs, and RS232 ECU connections, etc. Includes 1 thermocouple lead.

22 Pin Harness w/ 2 thermocouples: V02573160
This expansion harnesses lets you access the advanced functions of your AiM MXL2 data logger. Extra analog sensor channels, digital wheel speed senor inputs, digital outputs, and RS232 ECU connections, etc. Includes 2 thermocouple leads.

37 Pin Harness w/ 1 thermocouple: V02573040
Same harness that is included with the MXL2 but with the addition of 1 thermocouple Lead.


37 pin Harness w/ 2 thermocouples: V02573050
Same harness that is included with the MXL2 but with the addition of 2 thermocouple Leads.

Remote Button Interface: X08RTN010
The remote buttons interface has been designed to make the MXL2 use easier when the system buttons can be difficult to push: typically, when the dashboard where the system is installed is too narrow or too far from your reach. 

22 Pin Female Deutsch Connector: 5CN822F00
This is the bare plug to allow for customized harness installation. This takes an advanced level of assembly knowledge and tools.

37 Pin Female Deutsch Conector: 5CN837F00
This is the bare plug to allow for customized harness installation. This takes an advanced level of assembly knowledge and tools.