Universal Fitment MK60 Motorsport ABS Standalone Harness - DSC Kit

  • $ 1,249.00


Below you will find some of the features of the 3DM / RHT MK60 Motorsport  ABS Standalone Harness Kit. In addition, 3DM and RHT have assembled an ever-evolving in-depth guide about the MK60 Motorsport ABS as a standalone. This guide covers the technology behind the ABS as well as installation and setup tips.

3DM/RHT MK60 Motorsport ABS Standalone Guide

MK60 Motorsport ABS Standalone Overview

The MK60 Anti Lock Braking System (ABS) is built by ATE and factory installed in a variety of cars. The MK60 is noteworthy in a motorsport context because of its ability to operate independently of a car's engine control unit (ECU) or other control modules. All sensor inputs are all controlled within the MK60's computer allowing it to operate in a mode referred to as "standalone".  Because of this, ABS can now be installed in any car with old technology ABS or cars not originally equipped with ABS. 

Our harnesses are built using MIL-Spec wiring, OEM connectors, and MIL-Spec Deutsch connectors. Chemical resistant heat shrink sleeve is used to loom all wiring to ensure resistance to fluids the harness may come into contact within an engine bay. 

Universal Fitment - DSC Kit Details

This product allows installation of the MK60 ABS system into a wide variety of cars. This kit allows for the addition of Dynamic Stability Control (DSC). DSC will assist in correcting over/understeer by actuating the brakes based on steering angle and yaw rate. By adding a CAN emulator, the ABS module can receive steering input from a steering angle sensor connected to the steering column. In the case of this universal kit, you will be responsible for installing the steering angle sensor to your steering column. This will require custom fabrication. 

This kits includes:

  • Main Harness with Connectors for All Required Sensors
  • OBD2 Diagnostics Port
  • Flying Leads for Power Hookup
  • Breakout Box with Malfunction Indicator Light (MIL) with LED Indicator
  • CAN Emulator
  • Steering Angle Sensor

Please feel free to contact us before placing your order to ensure you select the correct kit for your application. After placing your order we will contact you to discuss sensor run lengths and other details related to your specific application. This product includes after-sale support to assist in integrating our system into your application. This can include technical discussions, helping find and modify wheel speed sensors that work on your car, or other support you may need.

MK60 Power Supply Sub-Harness

This power supply harness further simplifies your MK60 harness installation. Connect the ring terminal to un-fused battery power (such as a power distribution point in the engine bay) and plug the 3-pin Deutsche Connector into your MK60 harness's power plug. The proper fuses are already installed and no additional fuse block or wiring is required.

The harness is supplied with OEM quality connectors and fuses to compliment your MK60 ABS harness.

MK60 Sensor Kit

As a service to our customers we’ve assembled this comprehensive MK60 sensor kit. The wheel speed and pressure sensors are new. However, similar to the MK60 pumps we offer, the DSC/Yaw sensor are sourced used and bench tested prior to putting them in inventory.

The Kit Includes:

  • 4 x Wheel speed sensors (for E36/E46 applications)
  • 2 x Pressure sensors
  • 1 x DSC/Yaw sensor
  • 1 year replacement warranty

MK60 Pump/Module

Due to the high cost of units when purchased new, we source these used units and then refresh and bench test them prior to putting them in our inventory. 

These units come with a 1 year replacement warranty.